DRILLING RIGS SPC600ST Water Well Drilling Rig

Model

SPC600ST Water Well Drilling Rig

Picture

Key word

Drilling Rig

More key word

Geological Drill Rig,Water Well Drilling Rig

Detail information

Water Well Drilling Rig SPC600ST is a truck mounted rotary drilling rig. Equipped with proper drilling devices this rig can be used for other drilling technologies. The model is mainly for hydrological geology and water well drilling in clay, sand and bedrock layers. It can also be used for construction of underground tunnels, ventilation holes, etc.
The rig can be installed on the chassis of "STEYR" truck with 10 driving wheels for good off-highway performance and driving on bad roads.
The rig is compact in structure, centralized in control and equipped with high pressure and high volume mud pump. Pressure increase and decrease mechanism is insulting in drilling efficiency.
Drilling depth:                                   600m
Diamond of hole: Hole opening 500 mm hole ending 190 mm
Driving drill rod:                                108x108x7315mm
Drill rod inside:                    D89x6000mm, 73x6000mm
Effective height of drilling tower:      15m, 11m
Nominal load of main hook:              25t
Main hoist single cable tension:       44kN
Nominal pressure increase and decrease of cables:  Increase 196kN
Decrease 135kN
Stroke of pressure increase and decrease:   7.6m
Rotation speeds of rotary table:                     Normal 27, 49,80,131,208rpm. Reverse 35rpm.
Maximum through hole diameter of rotary table:   505 mm
Power source(diesel engine): Model BF6L913C 141kw/2500rpm
Model 6135AN-1 100kw/1500rpm
Mud pump BW1100
Dimensions(in transportation status):    14180x2500x4230mm
                                                                12000x2500x4230 mm
Weight :                                                    27t